Radxa ROCK 3A is a Raspberry Pi-sized personal computer with an M.2 slot for NVMe SSD
Table of Contents
The Radxa Rock 3A is a credit-card-sided one-board pc with a 2 GHz Rockchip RK3568 quad-core ARM Cortex-A55 processor, Mali-G52 graphics, and a neural processing device.
It appears to be a bit like a Raspberry Pi and has some very similar capabilities together with a 40-pin GPIO header and USB and Ethernet ports. But Radxa’s minor personal computer stands out in a few approaches. It support san optional eMMC storage module. And it has two M.2 keys – just one for wireless playing cards and a further for PCIe NVMe good state storage.
Radxa states the Rock 3A will be obtainable for acquire setting up in August, with prices ranging from $35 for a model with 2GB of RAM to $75 for an 8GB design.
All types will have the identical fundamental attributes set like:
- Processor: Rockchip RK3568
- RAM: 2GB, 4GB or 8GB of LPDDR4-3200 memory (DRAM controller frequency up to 1560 MHz)
- Storage: Pluggable eMMC module, M.2 important for PCIe 3. x2 NVMe SSD (on the base), microSD card reader
- USB-C: 1 x USB-C for electricity shipping and delivery
- USB-A Ports: 2 x USB 3. (1 x OTG and 1 x Host) and 2 x USB 2.
- Connectivity: Gigabit Ethernet with PoE assistance and M.2 E crucial for PCIe 2. x1/SDIO/UART with assistance for WiFi cards
- Show: HDMI 2. and MIPI DSI
- Other connectors: 40-pin GPIO header and MIPI-CSI digicam connector
- Dimensions: 85mm x 54mm (3.3″ x 2.1″)
The system can also be configured to aid SATA storage by applying a breakout cable linked to the two USB 3. ports.
Radxa says the Rock 3A will help the Debian 10 Linux for Rockchip-driven equipment that is preserved by the Toybrick workforce, but it is very likely that other running devices will be ported to the system as properly.
through CNX Computer software
